Wallbox PULSAR PLUS Guide D'installation page 12

E N
In case it is needed to reopen the device, use only the tool (I-1) provided for this procedure
included in the Wallbox box. The use of any other tool or means may cause damage in the
charger, which wouldn't be covered by the product warranty.
5. Plug holder
Step 5.1: Mark the position for the securing screws on the wall.
Step 5.2: Drill the marked holes.
Step 5.3: Fix the anchor to the wall. Insert the screws in the marked positions.
6. Add charger to your myWallbox account
Step 6.1: Download the Wallbox App available from
Android Play Store or Apple App Store.
At this point the Pulsar Plus is registered in myWallbox.
12
Step 6.2: Log-in using your
account.
Step 6.3: Add your
charger by clicking on the
"+" button on the main
page, introduce the SN
and UID of your charger.