Summary Table - aqua Ecowash Mode D'emploi

STANDARD CONSOLE
Control console for eco•wash system
3.11

Summary table

Method
stand-by
stand-by
stand-by
stand-by
stand-by
execution of the
washing program
execution of the
washing program
pause
pause
priming
priming
priming
priming
diagnostic 1
diagnostic 2
diagnostic 2
ADSP7000604
Operation
Washing programs
selection
Execution of the washing
program
Pumps priming
Diagnostic 1
Diagnostic 2
Place program in pause
Diagnostic 1
Return to stand-by mode
(exit from washing
program)
Return to execution mode
of the washing program
Pump selection
Start of the wanted pump
Pump stop
Return in stand-by mode
Exit diagnostic 1 mode
Check and verification of
the various functionalities
Return in stand-by mode
rev. 1.3
Keys
With keys  it is possible
to select the washing
program
Using key ► it is possible
to start the selected washing
program
Keep the Enter key pressed
for about 3 seconds
Press key F
Simultaneously press the
ENTER and F keys for about
3 seconds
Keep the ► key pressed
for about 3 seconds
Press key F
Briefly press the ENTER key
and then confirm, again with
the ENTER key
Briefly press key ►
Using keys  it is possible
to select the wanted pump
Using the ► key it is
possible to start the selected
pump for one minute
Using the ► key it is
possible to stop the selected
pump
Keep the ENTER key
pressed for about 3 seconds
Press the F key or wait 30
seconds
Using the F key it is possible
to scroll the various
functionalities to verify
Press the ENTER key or wait
30 seconds
17/09/2015
FUNCTIONING
ENGLISH
What is shown on
display
The program name and
number if it has been
programmed
The program name and
number if it has been
programmed and the
washing time.
Pump 1 priming
Check the functioning
pumps and the active
input signals
Check of the
transmission between
the various modules

Check functioning
pumps and the active
input signals
The program name and
number if it has been
programmed and the
washing time.
The program name and
number if it has been
programmed and the
washing time.
The pump number from
1 to 10 cyclically.
The number of the
selected pump and the
symbol indicating that
the pump is functioning
The number of the
selected pump.
Wait
Return previous mode
Signals module
Pumps module
Central module, etc.
Wait
19/62