NF BOURGEAT SATELLITE 4G Mode D'emploi page 32

CAUSES OF NON-OPERATION
y Turning it on : when turned on, nothing lights up.
Check that the trolley is plugged in correctly.
Press the ON button.
y On hot trolleys that are operating :
- The following pictogram appears :
The trolley door is open, check that the latter is properly closed.
- The following pictograms appear :
Press the screen once
The trolley is not reaching the minimum temperature that makes it possible to guarantee the hot link. Check that the fan behind the air
circuit is not blocked, and confirm the error message.
If after restarting the «spanner + hand» pictogram appears, a hardware problem has been detected. Contact your installer.
- The following pictograms appear :
Press the screen once
The trolley has exceeded the maximum permissible temperature, which can damage the products in the chamber. The interface displays
the detection of a problem with the electrical power, adjustment or ventilation. Confirm the error message.
- 32 -
°
< 63
OK
OK
OK
OK
________________
°
>130
OK OK
Keep your finger on this
button for 2 seconds.