General Characteristics - Favero Electronics FTT-1 Mode D'emploi

ENGLISH
FTT-1
: Miniaturized device and Tester for
fencing.
FTT-1 is indicated for:
– The signalling of hits in fencing and epee training.
– The electrical control of the three weapons and of the
various body cords.

General characteristics:

– Direct connection to the 3-pin plug of all the body cords.
– Easy attachment of the fixing clip to the athlete's
clothing (small pocket, belts, etc.)
– Visual and audio signalling.
– Two buttons for selecting the operation to be performed
and the type of sound.
– Power supply with a standard battery for remote
controls 12V of the A23 or VR22 type. The lifespan is
of approximately 5000 hits! To substitute the battery,
open the container with a cross shaped head
screwdriver.
– Extremely reduced dimensions: 7.6x4.8x1.6cm
(excluding the fixing clip). Weight: 60g
Selection of the OPERATION MODE
Subsequent pressure of the SELECT button allows a
choice of three set working functions:
– Recording machine FOIL
– Recording machine EPEE
– TESTER : 2 YELLOW lights
After 3 seconds the lights of FTT-1 turn off, maintaining
the set working modality.
Selection of the SIGNALLING SOUND
Subsequent pressure of the SOUND button allows the
selection of the signalling sound of the hits:
– Long Continuous
– Long trilling
– Brief sound (0.15sec)
: RED light
sound (1sec)
sound (1sec)
- 2 -
: GREEN light