Troubleshooting; Specifications - Texas HMH 5500S Manuel De L'utilisateur

Troubleshooting:

The motor will not start
1. Check the fuel control is set correctly.
2. Check the spark plug.
3. Check there is fresh gas in the tank.
4. See separate motor instructions for further
troubleshooting.
The motor is not running smoothly
1. Ensure the throttle control is not set to max.
2. Check there is fresh gas in the tank.
The blades will not rotate
1. Check for stones lodged between the blades.
2. Release any stones by removing the blades.
3. Check the cables are in good working order and
fitted correctly.
4. Check the belt is in good working order and
fitted correctly.
5. Ensure the belt tensioner is adjusted correctly.
The blades will not stop
1. Stop the engine and contact your dealer.

Specifications

Model
Length (mm)
Width (mm)
Height (mm)
Weight dry (kg)
Rotation speed, knives (rpm)
Working width (mm)
Steer
Gear forward
Gear reverse
Working depth (cm)
HMH 5500S
1210
550
1020
52,5
160
36-55-85
Fast
1
1
33
6