Connecting Another Preamplifier; Connecting A Power Amplifier And; An Active Subwoofer - Yamaha C-5000 Mode D'emploi

Connecting another
preamplifier
If you connect the output of another preamplifier to the
EXT. IN jacks on this unit and press the EXT. DIRECT
switch, the source signal will pass through the unit and
will be output to the connected power amplifier. The
source signal input at the balanced EXT. IN jacks will
be output at the balanced BAL jacks. The source signal
input at the unbalanced EXT. IN jacks will be output at
the LINE 1 and LINE 2 jacks.
Note
If the EXT . DIRECT switch is turned on, you will not hear any
sound from the headphones connected to the PHONES
jack .
Other preamplifier
L
OUTPUT
（BALANCE）
R
AV amplifier, etc
L
PREOUT
R
Connecting a power amplifier
and an active subwoofer
You can connect a power amplifier and an active
subwoofer to the BAL, LINE 1, or LINE 2 output jacks
on this unit.
Balanced connection
Unbalanced connection
NOTICE
Do not use balanced and unbalanced connections between
two components simultaneously . Doing so would create a
ground loop that could generate static and noise .
Power amplifier
L
INPUT
（BALANCE）
R
Power amplifier
L
INPUT
（UNBALANCE）
R
Active subwoofer
L
INPUT
（UNBALANCE）
R
23