Operations; Upper Washer; Control Panel - Samsung FlexWash WV60M9900A Série Manuel D'utilisation

Operations

Your dual loading washer features upper and the lower washers for your convenience.
The upper washer is an automatic tub loader that is designed to wash relatively small
loads while the lower washer is a drum loader that takes care of normal or relatively
heavy loads. The main panel is divided into 2 independent control panels.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this washer.

Upper washer

Control panel

01
01 Cycle bar
02 POWER
03 START/PAUSE
(Hold to Start)
04 Status bar
05 Temp.
06 Extra Rinse
07 Self Clean
08 Smart Control
FlexWash_WV9900M_DC68-03768A-04_EN.indd 43
02
Press to select a cycle.
Press to turn the upper washer on or off.
Press and hold to start operation or press to stop operation
temporarily.
The status bar shows current cycle information and estimated time
remaining, or an information code if the upper washer needs to be
checked.
Press to toggle between two different water temperature options.
• Warm: Colorfast items.
• Cold: Brightly colored, very lightly soiled items.
Use to add an additional rinse at the end of the cycle to remove
laundry additives more thoroughly.
Use to clean dirt and bacteria from the tub. Regular use (after
every 20 washes) is recommended. No detergent or bleach is
needed. Make sure the tub is empty.
After connecting the upper washer to your home network using
the Samsung Smart Home app, you can control the washer
remotely. When started, the Smart Control indicator blinks and
the top door locks. The washer enters waiting mode and waits for
remote commands. For more information, visit the Samsung Smart
Home page.
05
04
03
06 07 08
English 43
2017-05-22 7:03:33