Samsung FlexWash WV60M9900A Série Manuel D'utilisation page 30

Installation
STEP 6 Position the drain system
C
30 English
FlexWash_WV9900M_DC68-03768A-04_EN.indd 30
The pipe connector is attached on the
product.
NOTE
A
A : Upper drain hose
B : Lower drain hose
B
C : Pipe Connector
In a wall standpipe drain system
The drain hose must be placed into a wall
standpipe drain system.
After inserting 2 drain hoses into the pipe
connector, use tie straps to bind the drain
hoses, and then insert the pipe connector
into the wall standpipe.
When complete, use the tie straps to bind
the drain hose to the water hose.
WARNING
Make sure to use the pipe connector
before inserting the drain hoses. Without
the pipe connector, the drain hose will
not be positioned securely inside the wall
standpipe, causing a water leak.
2017-05-22 7:03:30