Technical Specifications - NORDFOREST Titan 80 Mode D'emploi

20-076 | 03.2017
Technical specifications
General data
Length
Width
Height
Weight with ratchet
Height of spring steel plates with
extended teeth
Lifting wedge height
Lifting wedge width
Lifting wedge extension
Wedge extension
Thread pitch
Lifting force max.
The maximum lifting force of approx. 50 kg is achieved with one
turn of the ratchet. The torque generated is then approx. 200 Nm.
Torques for fixing screws
Screws on spring steel plates
Screws of drive nuts
Screw for extension limitation
The shaft nut must be turned by hand as far as it will go, and then
pre-tensioned with a fifth revolution and fixed by the locking plate.
Material
Main housing
Threaded drive
Drive nut
Spring steel plates with teeth
Carrier grip
Lifting wedge
480 mm
120 mm
165 mm
5700 g
1.5 mm
80 mm
90 mm
224 mm
160 mm
5 mm
25 t
35 Nm
15 Nm
50 Nm
Aluminium
High strength special steel
Bronze
Spring steel
Plastic
Special plastic
Nordforest Mechanical Titan 80 Felling Wedge

Technical specifications

57