Using The Rotisserie - SilverCrest SGBR 1500 B3 Mode D'emploi

Using the rotisserie

WARNING! RISK OF INJURY!
► Always use the tongs
serie into the appliance or to remove it.
■ You can use the two skewer clamps
food onto the rotisserie
on the skewer clamps
food is fixed firmly in between the clamps and
then screw the restrainer
■ First push the end of the rotisserie
notch into the drive
Fig. 1: Push the rotisserie
■ Then insert the other end of the rotisserie
the deep groove in the spit fitting
Fig. 2: Insert the rotisserie
SGBR 1500 B3
to insert the hot rotis-
to fix the
. Loosen the restrainer
, push them so that the
tight again.
without the
(Figure 1):
into the drive .
with
(Figure 2):
in the spit fitting
NOTE
► Always slide the baking tray
rail when you use the rotisserie
This will collect any drips.
■ To remove the hot rotisserie
the hooks at the end of the tongs
recesses on the rotisserie
Fig. 3: Hooking the tongs
■ First lift the left-hand side of the rotisserie
of the spit fitting
from the drive
.
into the lower
.
, grip with
into the
(Figure 3):
onto the rotisserie
and then pull the rotisserie
.
GB │ IE │ NI
out
│ 7 ■