Yamaha MW8CX Mode D'emploi page 26

Reference
Specifications
■ Analog Input Specifications
Input Connectors Gain
-60 dB
CH INPUT MIC
(CHs 1, 2)
-16 dB
-34 dB
CH INPUT LINE
(CHs 1, 2)
+10 dB
-60 dB
ST CH MIC INPUT
(CHs 3/4, 5/6)
-16 dB
-34 dB
ST CH LINE
INPUT
(CHs 3/4, 5/6)
+10 dB
ST CH INPUT
(CH 7/8 (CHs 7/8, —
9/10)*)
CH INSERT IN
—
(CHs 1, 2)
RETURN (L, R) —
2TR IN (L, R) —
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
** Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to
the maximum level. (All level controls are at their maximum position.)
■ Analog Output Specifications
Output Connectors
STEREO OUT (L, R)
EFFECT SEND
(AUX SEND*)
CH INSERT OUT
(CHs 1, 2)
REC OUT (L, R)
MONITOR OUT (L, R)
PHONES OUT
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* The MW8CX feature is described first, followed by the MW10C feature in brackets: MW8CX (MW10C)
■ Digital Input/Output Specifications
Connector
USB
92
MW8CX/MW10C Owner's Manual
Input Appropriate
Sensitivity **
Impedance Impedance
-72 dBu
50–600 Ω (0.195 mV)
3 kΩ
Mics
-28 dBu
(30.8 mV)
-46 dBu
600 Ω (3.88 mV)
10 kΩ
Lines
- 2 dBu
(0.615 V)
-72 dBu
50–600 Ω (0.195 mV)
3 kΩ
Mics
-28 dBu
(30.8 mV)
-46 dBu
600 Ω (3.88 mV)
10 kΩ
Lines
- 2 dBu
(0.615 V)
600 Ω
-22 dBu
10 kΩ
Lines (61.5 mV)
600 Ω
-12 dBu
10 kΩ
Lines (195 mV)
600 Ω
- 8 dBu
10 kΩ
Lines (308 mV)
600 Ω
-22 dBV
10 kΩ
Lines (79.4 mV)
Output Appropriate
Impedance Impedance
150 Ω
10 kΩ Lines
150 Ω
10 kΩ Lines
75 Ω
10 kΩ Lines
600 Ω
10 kΩ Lines -10 dBV (0.316 V)
150 Ω
10 kΩ Lines
100 Ω 40 Ω Phones
Format
USB Audio 1.1
Nominal Max. before
Level Clipping
-60 dBu -40 dBu
(0.775 mV) (7.75 mV)
-16 dBu +4 dBu
(123 mV) (1.23V)
-34 dBu -14 dBu
(15.5 mV) (155 mV)
+10 dBu +30 dBu
(2.45 V) (24.5 V)
-60 dBu -40 dBu
(0.775 mV) (7.75 mV)
-16 dBu -6 dBu
(123 mV) (389 mV)
-34 dBu -14 dBu
(15.5 mV) (155 mV)
+10 dBu +30 dBu
(2.45 V) (24.5V)
-10 dBu +10 dBu
(245 mV) (2.45 V)
0 dBu +20 dBu
(0.775 V) (7.75 V)
+4 dBu +24 dBu
(1.23 V) (12.3 V)
-10 dBV +10 dBV
(0.316 V) (3.16 V)
Max. before
Nominal Level
clipping
+4 dBu (1.23 V) +20 dBu (7.75 V)
+4 dBu (1.23 V) +20 dBu (7.75 V)
0 dBu (0.775 V) +20 dBu (7.75 V)
+10 dBV (3.16 V)
+4 dBu (1.23 V) +20 dBu (7.75 V)
3 mW 75 mW
Data Length Connector Specification
16 bit
Connector
Specifications
XLR-3-31 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
TRS phone jack (balanced [Tip =
HOT, Ring = COLD, Sleeve = GND])
XLR-3-31 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
Phone jack (unbalanced)
Phone jack (unbalanced)
RCA pin jack
TRS phone jack (unbalanced [Tip =
Out, Ring = In, Sleeve = GND])
Phone jack (unbalanced)
RCA pin jack
Connector Specifications
TRS phone jack (impedance balanced
[Tip = HOT, Ring = COLD, Sleeve = GND])
TRS phone jack (impedance balanced
[Tip = HOT, Ring = COLD, Sleeve = GND])
TRS phone jack (unbalanced [Tip = OUT,
Ring = IN, Sleeve = GND])
RCA Pin jack
TRS phone jack (impedance balanced
[Tip = HOT, Ring = COLD, Sleeve = GND])
TRS phone jack
USB B type