What To Do In Case Of Breakdown - ALDEN 110420 Guide D'installation Et D'utilisation

HDMI / YPbPr menu (HDMI / YPBPR source)
H and V Position
This function enables you to adjust the horizontal / vertical position of the picture on the screen.
Reset
This function will set the H and V position values corresponding to the manufacturerʼs settings.

What to do in case of breakdown

Trouble
No picture and / or no sound.
A picture appears but no sound.
The remote control does not work
No TV signal
No external video signal
The picture lacks colour or is too dark
The picture looses colour per intermitance.
The reception is not enough,
the picture looses colours.
Diagonal lines appear on the picture.
White flakes on the picture.
A faint identical picture appears.
A-N-09505
PC
POSITION H
POSITION V
PLACEZ REMISE
MOVE ENTER
Solution
Make sure the television is properly connected to power supply.
Make sure the main switch is in On position.
Make sure the sound is not set at the minimum level (0) or in Mute
mode.
Make sure the television is properly connected to power supply.
Check the remote control and make sure the batteries are in order.
Make sure that the television is not in direct sunlight.
Make sure there are no obstacles between the remote control and
the television.
Make sure the video source is correct.
Make sure the coax cable is properly plugged in.
Make sure the television is properly connected.
Make sure the television is properly connected.
Make sure the satellite system is properly connected and oriented.
Check the picture settings in the main menu.
Make sure your satellite system is not dammaged nor
disconnected.
Make sure the channel settings are correct.
The system can be affected by external magnetic devices.
Make sure your satellite system is not dammaged nor
disconnected.
Check the orientation of your satellite system.
0
2
0
2
SORTIE
39