ALDEN 110420 Guide D'installation Et D'utilisation page 24

A high ambient temperature may cause the television to dysfunction. Do not use nor stock the television in direct
sunlight or near a source of heat. If the ambient temperature is too low, the quality of the picture may be affected.
If this is the case, switch the television off and wait for a few minutes. If the problem remains when you switch the
television on again, change the ambient temperature.
Unplug the television from the power supply before interfering with the television.
Only use the foot sold with the device. The television must be mooved carefully. It may fall in case of brutal stop,
in case of acceleration or when driving on damaged roads. Never install the television in a place where it will be
in direct contact with sunlight, high temperatures, high humidity or a lot of dust: this could damage the internal
parts of the television. Place the television on a stable surface and handle with care. The screen is made of glass
and can be damaged if droped, in case of collision or scraped.
When the television is not used during a long period, disconnect the power supply.
In case of dysfunction (unusual sound or smoke...), unplug immediatly the power supply from the television and
contact your retailer. Unplug the television from the power supply before attempting to repair it. Make sure the
technicien uses authorized spare parts. If these parts are not conform they may cause fire, electric shock or other
dangers. Follow all the maintenance and reparation procedures, make sure the technicien controls all security
devices to ensure that the television can be used without danger.
• By installing the product, you agree to the rules above •
24 A-N-09505