Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.3. Number of cable entries
Product code
XADW12...
XADW13...
XADW22...
Maximum number of cable entries on the entire periphery of the box
(1)
7. Safety instructions
The following safety instructions should be read in conjunction with the following standards:
standard NF C 15 100
IEC 60079-14 (Electrical installations design, selection and erection)
standard IEC 60079-17 (Electrical installations inspection and maintenance)
standard IEC 60079-31 (Equipment dust ignition protection by enclosure "t").
decrees, laws, directives, circulars of application, standards, rules of art and any other documents
concerning its place of installation
It is strictly forbidden to change anything on and in the product without our prior agreement
Make sure the compatibility between the data on the nameplate of the product with the existing
explosive atmosphere, the area of use, the ambient temperature and surfaces temperatures
Any damage of the product can have for consequence to make ineffective the explosion-proof
protection
The installation of the product have to be performed in the state of the art in the technical domain and
only by qualified, competent and authorized person.
A defective or abnormal use as well as the non-observance of the instructions of this document
exclude any clause of guarantee and do not engage our responsibility.
According to the standard IEC 60079-31, it is prohibited to operate the control station if the
dust thickness on it is greater than 50 mm.
Ex-tech Solution ensures the traceability of the control station up the first place of delivery.
XAD019A12-08 – 01/12/2016
M20
Sides
Sides
Max.
Sides
A & C
B & D
(1)
A & C
1
2
6
1
3
8
2
3
10
Operating instructions
Flameproof control station - XADW series
M25
Sides
Max.
Sides
B & D
(1)
A & C
1
2
6
1
1
3
8
1
2
3
10
2
½" NPT
¾" NPT
Sides
Max.
Sides
B & D
(1)
A & C
2
6
1
3
8
1
3
10
2
ENG
Sides
Max.
B & D
(1)
2
6
3
8
3
10
9/12
Publicité
Table des Matières
