Maintenance And Cleaning - ligra CINEDOMUS Manuel D'instruction

The adjustment indications are valid for screens with motor located on the right of the box, viewed
from the front.
Adjustment of upper end stop
Bring the fabric in its maximum upper position, then stop the movement by pressing the STOP
button (central position); introduce the standard 4 mm hexagonal screw in the fabric's lower
opening, turn the screw anti-clockwise = minus rise, clockwise = plus rise (Fig. 3).
Adjustment of lower end stop
Bring the fabric in its maximum lower position, then stop the movement by pressing the STOP
button on the inverter (central position); introduce the standard 4 mm hexagonal screw in hole,
turn the screw anti-clockwise = minus rise, clockwise = plus rise (Fig. 3).

MAINTENANCE AND CLEANING

Dust the box using a soft, clean cloth and eventually non aggressive detergents.
Clean the projection fabric by using a soft, clean, wet cloth, eventually combining neutral deter-
gents. Since the fabric could be charged with static electricity after cleaning due to the rubbing
with the cloth, it is advised to apply an anti-static liquid on the fabric with a clean cloth, to prevent
dust from being attracted again.
- 10 -