Alarmevent-Data Set-Function; History Mode - TFA KlimaLogg Pro Mode D'emploi

ALARM EVENT DATA SET FUNCTION:

If an alarm is triggered, your KlimaLogg Pro automatically
creates a special AlarmEvent data set.

Like a normal data record, this data record contains a
snapshot of all temperature and humidity values of all
channels as well as the current time and date.

Also he channel and the value that triggered the alarm are
marked in this AlarmEvent data set.

The AlarmEvent data sets are recorded in addition to the
normal data sets and are automatically listed in the history of
normal data sets.
The AlarmEvent data records can be displayed in the history mode on
the KlimaLogg Pro and also in the PC software separately.

HISTORY MODE:

You also have the option to read the data sets and the AlarmEvent data
sets on the KlimaLogg Pro itself.

Press HIST/DEL button in normal mode.

HIST appears in the display.

The memory indication is hidden.

The values of the latest data set as well as the time and date
when this data set was recorded will be shown.
Use the button as follows to navigate in history mode:
„HIST / DEL" ------------- next / older record
„OK / MAX.MIN." -------- previous / recent record
„Minus„ -------------------- Channel change within the selected data
„Plus" ----------------------- Channel change within the selected data
„ALM" ---------------------- separation of the Alarm Event-data sets
„SET" --------------------- Back to normal mode

To enter the latest AlarmEvent data set, please press ALM
button in HISTORY-MODE.

The channel and the value that triggered the alarm and the
corresponding upper or lower limit are also shown.
Note:
set (to the left)
set (to the right)
43