TFA KlimaLogg Pro Mode D'emploi page 47

Technical specifications:
Maximum switching voltage: 24V. DC
Maximum switching current: 400 mA
switch point 1
- high alarm -
switch point 2
- low alarm -
C = switch point 1, high alarm
B = switch point 2, low alarm
A = ground
Please get sure, while you plug in any external hardware that this unit is
We assume no liability for damage to the KlimaLogg Pro due to incorrect
use of the hardware output or for external devices that are connected.
Comply with the technical specifications.
not under electrical power.
Note:
46
Jack