Know Your Product; Description, Specifications And Instructions; Description Of Symbols; Electrical Safety - Rona 2001516 Manuel D'utilisation

KNOW YOUR PRODUCT

7
5
8
9
11
10
Know your product
1. On/off trigger switch
2. Battery
3. Soft grip handle
4. Forward/reverse lever switch
5. Keyless chuck
6. 2 Speed gearbox selector
7. Adjustable side handle
GB
8. Torque selector / Hammer selection collar
9. Battery charge indicator light
10. LED button
11. LED work area light
14
6
4
1
3
2
DESCRIPTION, SPECIFICATIONS AND
INSTRUCTIONS

Description of symbols

The rating plate on your tool may show
symbols. These represent important
information about the product or instructions
on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to UL 745-3,
745-4-1,745-4-2:1997.
Recycle unwanted materials instead
of disposing of them as waste. All
tools, hoses and packaging should
be sorted, taken to the local recycling
centre and disposed of in an
environmentally safe way.
Read the manual.
Warning.
Do not dispose of batteries.
Return exhausted batteries to your
local collection or recycling point.
Use inside only.
Do not expose to rain or water
Always charge the battery pack
between temperatures 0˚C to 40˚C.
Do not burn.
Fail-safe safety isolating transformer.
Nickel-cadmium battery.
Contains Nickel-cadmium battery.
Battery must be recycled or
disposed of properly.
Specifications
Nominal battery charge: 14.4V
Charger: 120V ~ 60Hz
Batteries: 2 x 1.5Ah
Charging time: 1 Hour
Drill no load speed: 0-350, 0-1250 RPM
Torque settings: 21 Positions
Max, drilling capacity: Steel: 10mm
Wood: 28mm
Concrete: 10mm
Drill chuck capacity: 13mm (1/2) keyless
Hammer impact frequency:
0-5,600 / 0-20,000 min-1
Weight: 2.1kg (4.6lbs)
General safety instructions
WARNING! Read and understand all
instructions. Failure to follow all instructions
listed below, may result in electric shock, fire
and/or serious personal injury.
Save these instructions.
Work area
a) Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep bystanders, children, and visitors
away while operating a power tool.
Distractions can cause you to lose control.

Electrical safety

a) Do not abuse the cord. Never use the cord
to carry the tool. Keep cord away from
heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately.
Damaged cords may create a fire.
b) A battery operated tool with integral
batteries or a separate battery pack must
15
GB