Care & Maintenance; Cleaning After A Brew; Cleaning Your Water Reservoir; Cleaning Your Carafe - Ninja CP307 Guide D'utilisation

CARE & MAINTENANCE

CLEANING AFTER A BREW

NOTE: For best results, we
recommend rinsing the reservoir
after brewing and refilling with fresh
water for the next brew.
1 After the unit has cooled, remove the
filter holder from the brew basket.
If using a paper coffee filter, discard
it. If using either the coffee or tea
permanent filter, wash it thoroughly
with soap and warm water or place
on top rack of dishwasher.
2 Clean the frother whisk after each
use. Hand-wash thoroughly or place
on top rack of dishwasher.
3 Wash the carafe and brew-through
lid with soap and warm water. Use a
bottle brush or a cloth to wash the
inside of the carafe. DO NOT use a
wire brush.
NOTE: The brew-through lid, coffee
and tea permanent filters, removable
filter holders, water reservoir, flip-top
lid, frother whisk, and scoop are
top-rack dishwasher safe.
The thermal carafe is NOT
dishwasher safe.
4 After the brewer has cooled, wipe
down the main unit, showerhead,
and water reservoir shelf with a
cloth and warm water. DO NOT
immerse the brewer in water.
18 1-877-646-5288

CLEANING YOUR WATER RESERVOIR

Empty the water reservoir and hand-
wash or place in your dishwasher.

CLEANING YOUR CARAFE

We recommend cleaning your carafe
with warm, soapy water.
If you want to clean the carafe more
thoroughly, we recommend using a soft
foam brush. DO NOT use a wire brush.
The thermal carafe is NOT
dishwasher safe.
Fig. 22
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
CLEANING & DESCALING
YOUR BREWING SYSTEM
The CLEAN button will illuminate when
a cleaning cycle is recommended for
your unit, as calcium scale buildup
could be affecting the flavor of your
coffee or tea.
To clean and descale your
Ninja Hot & Cold Brewed System™:
NOTE: The clean cycle takes
approximately 60 minutes.
1 Select the Full Carafe size and
set the empty carafe beneath
the brew basket.
2 Use a descaling solution specifically
formulated for coffeemaker cleaning
and follow the directions on the
package. Fill the water reservoir up
to, but not exceeding, the Max Fill
line (50 oz.).
OR
Fill the water reservoir to the Travel
Mug line (16 oz.) with white vinegar,
then fill the rest of the reservoir with
water up to, but not exceeding, the
Max Fill line.
IMPORTANT:
Use only white vinegar.
3 Once the water reservoir is filled
with your cleaning solution and
water mixture, press the CLEAN
button (Fig. 22).
NOTE: To cancel the clean cycle, press
the Power button or CLEAN button
once. The unit will beep and stop
brewing through the cleaning mixture.
Continue to follow the instructions
starting at Step 6.
IMPORTANT:
If you cancel the
clean cycle, your machine will not
be properly descaled.
4 The clock will display and count
down the remaining clean cycle
time, which takes approximately
60 minutes to complete. Your
unit will deliver a small amount of
cleaning solution to distribvute it
through the system. It will then pause,
deliver additional cleaning solution,
and continue for 60 minutes. The
extended pauses allow for maximum
cleaning and descaling.
IMPORTANT: DO NOT remove the carafe
at any time throughout the clean cycle.
5 Upon completion, the brewer will
beep, the clock will display End,
and the CLEAN light will turn off.
6 Empty and thoroughly clean the
carafe and water reservoir with warm,
soapy water to remove any cleaning
solution that could affect the flavor
of your coffee or tea.
7 Fill the reservoir with fresh water
up to, but not exceeding, the
Max Fill line and set the empty
carafe beneath the brew basket.
8 Flush the system by running a Full
Carafe, Classic Brew cycle with water
only. After the cycle is complete,
discard the water and thoroughly
clean the carafe.
NOTE: If the CLEAN light illuminates
again, then calcium buildup is still
present. Repeat the cleaning cycle
instructions from the beginning, and
the CLEAN light will automatically turn
off when your brewer is clean.
ninjakitchen.com 19