Sony KP-EF61 Mode D'emploi page 7

Front of TV
When connecting a monaural VCR
Connect the yellow plug to
When connecting video game equipment
Connect video game equipment to the ... 3 (video input) jacks at the front or the rear of your TV.
When connecting a VCR to the
Preset the signal output from the VCR to the program position 0.
When connecting video equipment to the ... 3 (video input) jacks at the front and the rear
Do not connect video equipment to the ... 3 (video input) jacks at the front and the rear of your TV simultaneously; otherwise the picture
will not be displayed properly on the screen.
If both S Video and video signals are input simultaneously
The S video input signal is selected. To view a video input signal, disconnect the
Note on the video input
When no signal is input, the screen becomes blue.
Connecting audio/video equipment using Ú (monitor/TV output) jacks
When the audio cable is connected to the
Rear of TV
to (antenna) socket
1
2
3
(VARIABLE)
R L
3
to
(S video input)
L
(MONO)
R
to ...
(yellow)
-L (MONO)(white)
-R (red)
(video input) and the black plug to
(antenna) terminal
(VARIABLE) jacks, you can adjust the volume with Á +/–.
R L to Ú (monitor/TV output)
(MONO)
(yellow)
-L (MONO)(white)
-R (red)
Camcorder
3 (video input)
-L (MONO) (audio input).
(S video) connection.
to
antenna
VCR
output
to video and
audio inputs
: Signal flow
to S video output
to video and
audio outputs
: Signal flow
Audio system
or
to audio
inputs
Getting Started
7
-GB