Hkoenig HSX16 Manuel D'utilisation page 3

prevent any personal injury or damage to this product. Do not use any
object in place of the feeding rod. Do not keep your eye close to the
feeding chute to avoid any accident.
The food material needs to be cut into proper pieces so as to pass
8.
through the feeding chute to extract Please remove the hard core,
seed, skin or shell of the food before use.
Proper amount of force shall be used to push the food material in, not
9.
excessive but sufficient to have it cut off exactly.
The filter, end cap, auger or feedign chute may be dyed by the juice
10.
during operation, which is a normal phenomenon and has no effect
on edibility and does no harm to health.
This product has safety protection after long time use more than
11.
20min, it will stop automatically . And in such case, rest it for 20-30
minutes before restarting it, so as to cool the motor down and prolong
product service life
In case that current limit protection is triggered or the motor is locked
12.
and stops automatically, disconnect the power supply and keep the
switch in position "off", and press Rotate Backwards button on the
power switch, and then discharge the food material and then press
Rotate Forwards to restart the machine. If the problem continues, it is
recommended to remove any food material inside feeding chute
before restart so as to protect the motor.
Upon completion, remove any removable part only after the
13.