Réajuster Un Raid En Non-Raid - Asus P4C800-E Deluxe Guide De L'utilisateur

5.5.6 Réajuster un RAID en non-RAID
Prenez garde en réajustant un RAID en non-RAID. Réajuster toutes
les donnéesRAID supprimera toutes les structures RAID internes des
diques RAID !
Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
0 ST320413A
1 ST320413A
[ [
Pour réajuster une structure RAID en non-RAID :
1. Sélectionnez 3. Reset Disks to Non-RAID et appuyez sur <Entrée>.
2. Quand un message de confirmation apparaît, appuyez sur Y pour
retourner à un structure de disque dur non-RAID.
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
WARNING: Selecting "Yes" will cause all data on any RAID disk
Are you sure you want to destroy all RAID data (Y/N):
Guide de l'utilisateur de la carte mère ASUS P4C800-E Deluxe
[ MAIN MENU
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RaID
4. Exit
[ DISK/VOLUME INFORMATION
Serial #
xxxxxxxx
xxxxxxxx
]-Select ]-Select [ESC] Exit [ESC] Exit
[ RESET ALL DATA RAID DATA
(RAID Volume or Other RAID Disk) to be lost.
]
]
Size Status Bootable
18.6GB Normal
18.6GB Normal
[Enter]-Select Menu [Enter]-Select Menu
]
Yes
Yes
5-37