Setting The Calibration Temperature T 1 (Hot Water Temperature) - GF JRGUTHERM 2T Notice De Montage Et D'utilisation

4.2 Setting the calibration temperature T
(hot water temperature)
The desired calibration temperature T
be taken from the table. The values given
are reference values covering the desired
hot water control range of 35-60°C.
Recommended temperature range according
to DVGW: 55-60°C.
1
3
Setting the hot water temperature
1 Scale ring (gradation: 35-60°C)
2 Allen key SW4
3 Hexagon socket
Remove the sealing cap, apply Allen key (2) to
the hexagon socket (3) and adjust the desired
temperature.
Warning
1
Don't exceed the stop
(minimum/maximum) when
can
1
adjusting the temperature.
2
E
83