Drainage Connection; Water Connection - Gaggenau CM470711 Notice De Montage

Drainage connection

9
CAUTION
The domestic drain water system must be vented.
The siphon must have a suitable connection.
Check that the drain water hose is not kinked,
crushed or twisted. Check that there is not a
cover in the drain water connection preventing
drainage of the water. Remove if necessary.
1 Remove the cap from the drain water hose.
2 Place the hose clamp on the drain water hose.
3 Slide the drain water hose onto the drain water
connection.
4 Use the hose clamp to secure attachment of the
drain water hose to the drain water connection.
5 Check the connections and drain water connection
for leaks.
14

Water connection

Open the tap on the water connection and draw off
approx. 10 litres of water to clean the domestic water
pipe. Then turn off the tap.
9
WARNING
Risk of electric shock
The appliance must be disconnected from the
Fig. 9
electrical supply.
Only connect the appliance to the cold water
connection.
Fig. 10
Check that the water inlet hose is not kinked, crushed or
twisted. The plastic housing in the AquaStop contains
an electric valve so do not immerse in water. The water
inlet hose contains the connecting lines so do not cut
through this hose.
1 Screw the water inlet hose with the AquaStop to the
tap.
2 Slowly turn on the tap so it is fully open.
3 Check the connections and water inlet hose for
leaks.