Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Device description
4D neck massager
2
3
4
5
9
6
7. Initial use
• Remove the packaging.
• Check the device, mains adapter and mains cable for damage.
• Insert the connector plug into the socket on the massager.
• Ensure that the mains cable does not pose a trip hazard.
8. Usage
To begin with, press the area to be massaged only carefully against the device. Then check carefully
whether the massage position is pleasant for you and then shift your weight gradually towards the mas-
sager. Switch on the massager with the
kneading rollers will begin to rotate, while the pinch nodes move up and down.
You can select the massage direction by pressing the
If you wish to switch on the heat function, press the
function will switch off again.
You can select between 2 intensity levels and one massage mode (short, sudden kneading movements)
with the
button. The device automatically starts on the lowest intensity level.
Press the
button to switch the massager off again.
Note
• The massage should feel pleasant and relaxing at all times. If the massage is painful or uncomfort-
able, stop the massage or change the contact pressure using the handles.
• Use the massager for max. 15 minutes. Longer massages can lead to over-stimulation of the mus-
cles, creating tension instead of aiding relaxation.
• The massager features an automatic switch-off function, which is set to the maximum operating
duration of 15 minutes.
1
7
button. When switching the device on with the
1. 4 x kneading rollers
2 x pinch nodes (heatable)
10
2. Control element
3.
button
4.
button (anti-clockwise and clock-
wise rotation of the kneading rollers)
5.
button (2 intensity levels,
1 massage mode)
6.
button (heat function)
7. Handles
8
8. Mains adapter
9. Mains connection cable (cable is
secured to the side)
10. Removable and washable cover
button.
button. If you press the
14
button, the
button again, the heat
Publicité
Chapitres
Table des Matières
