Rinçage Plus; Before First Use - Zanussi ZWS76100SS Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPTIONS
TEMP.
With this option you can change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature comes on.
ESSORAGE - SPIN
With this button you can set one of these options:
The indicator of the set speed comes on.
Automatic spin reduction
Set this option to decrease the spin seed to a
half, but not less than 400 rpm.
Suitable for very delicate fabrics.
Rinse Hold
Set this option to prevent the laundry creases.
The drum turns regularly to prevent the laundry
creases.
There is a water in the drum when
the programme is completed. The
door stays locked. You must drain
the water to unlock the door. To
drain the water refer to 'At the end
of the programme'.
SETTINGS
EXTRA RINSE
With this option you can permanently have an
extra rinse when you set a new programme.
To activate/deactivate this option touch the
buttons Essorage - Spin and Rapide - Quick

BEFORE FIRST USE

During installation or before first use
you may observe some water in the
appliance. This is residual water left in
the appliance after a full functional test
in the factory to ensure the appliance
is delivered to customers in perfect
working order and is no cause for
concern.
1. Connect the mains plug to the mains socket.
2. Open the water tap.
10
RAPIDE - QUICK
Press this button to decrease the programme
duration.
Set this option for items with light soil or items to
refresh.
RINÇAGE PLUS
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related phase indicator on the control panel
comes on.
DÉPART DIFFÉRÉ - DELAY START
With this option you can delay the start of a
programme by 9, 6 or 3 hours.
at the same time until the indicator Rinçage plus
comes on/goes off.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in the
compartment for washing phase.
5. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.

Publicité

Table des Matières
loading

Table des Matières