Wash Cycles And Functions; Table Of Wash Cycles; Wash Functions - SCHOLTES SMLE 129 Mode D'emploi

Wash cycles and functions

Table of wash cycles

Description of the wash cycle
Everyday wash cycles
White Cottons: extremely soiled whites.
Standard Cotton 60° (1) (1° press of the button): heavily soiled whites and resistant colours.
Standard Cotton 40° (2) (2° press of the button): lightly soiled whites and delicate colours.
Standard Cotton 20° (3° press of the button): lightly soiled whites and delicate colours.
Synthetics Resistant (1° press of the button): heavily soiled resistant colours.
Synthetics Resistant (3) (1° press of the button): lightly soiled resistant colours.
Synthetics Delicate (2° press of the button): lightly soiled whites and delicate colours.
Fastwash 30 min (1° press of the button): to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
Refresh 15 Min (2° press of the button): to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
Special cycles / Memory
M
Memory: allows for any wash cycle to be stored.
Baby cycle: heavily soiled delicate colours.
Silk: for garments in silk and viscose, lingerie.
Woolmark Platinum: for wool, cashmere, etc.
Partial wash cycles
Fast Spin Cottons (1° press of the button)
Rinse Cottons (2° press of the button)
Pump out (3° press of the button)
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to
factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle
3) Synthetic program along: set wash cycle

Wash functions

Stain removal
4
1
2
3
detergent and any fabric softener you wish to use, set the desired wash
cycle and enable the "Stain removal" function.
! The use of extra compartment 4 excludes the "Pre-wash"
function.
! It cannot be used with the ,
programmes.
Prewash
If this function is selected, the pre-wash cycle will run; this is
useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
! It cannot be used with the
,
(2° press of the button) with a temperature of 40°C.
(1° press of the button) with a temperature of 40°C.
This function is particularly useful
for the removal of stubborn
stains. Place extra compartment
4 (supplied) into compartment 1.
When pouring in the bleach, be
careful not to exceed the "max"
level marked on the central pivot
(see figure).To run the bleach cycle
on its own, pour the bleach into extra
compartment 4, set the "Rinse"
programme and activate the "Stain
removal" programme. To bleach
during a wash cycle, pour in the
, , Fast Spin Cottons, Pump out,
, , , , programmes.
,
Max. Max.
temp. speed
(°C) (rpm)
Pre-
Wash
wash
90° 1200

60° 1200 -
40° 1200 -
20° 1200 -
60° 800

40° 800

40° 800 
30° 800 -
30° 800 -
40° 800 -
30° 0 -
40° 800 -
- 1200 -
- 1200 -
- 0 -
(1° press of the button) with a temperature of 60°C.
(2° press of the button) with a temperature of 40°C.
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with the
Pump out, programmes.
Easy iron
By selecting this function, the wash and spin cycles will be modified in
order to reduce the formation of creases. At the end of the cycle the
washing machine will perform slow rotations of the drum; the EASY
IRON and START/PAUSE indicator lights will flash (orange) and the
text "END OF CYCLE" will appear on the display. To end the cycle,
press the START/PAUSE button or the EASY IRON button. For the
Silk/Curtains cycle, the machine will end the cycle while the laundry
is soaking; the EASY IRON and START/PAUSE indicator lights will
flash (orange) and the text "STOP WITH WATER" will appear on
the display. To drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON button.
! It may not be used with the
Mini load
This function is recommended for when the load of laundry is
equal to half, or less than half, of the maximum recommended
load (see Table of wash cycles).
! It cannot be used with the
out, programmes".
Detergents
Fabric Ble-
softener ach
7 53 2,16
  
7 53 1,26 52,5 190'
  
   7 53 1,09
7 - -
  
3,5 44 0,93
  
3,5 44 0,57
  
   3,5 - -
  - 3 71 0,15
  - 1,5 71 0,19
3 - -
  
- 1 - -
 
- 1,5 - -
 
- - - 7 - -
-   7 - -
- - - 7 - -
, Fast Spin Cottons,
, , , programmes.
, , ,Fast Spin Cottons, Pump
GB
72 160'
92 185'
- 170'
47 115'
46 100'
- 75'
35 30'
31 15'
- 120'
- 55'
- 70'
- 16'
- 36'
- 2'
11