Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
Hotkey Switching and Configuration Commands
Command
Binds KVM & Hub switching (Default, Z for QWERTY kb!)
Unbinds KVM & Hub switching
Binds KVM & Audio switching (Default)
Unbinds KVM & Audio switching
Switches directly to port 1, 2, 3 or 4
Switches USB Hub to port 1, 2, 3 or 4
Switches Audio devices to port 1, 2, 3 or 4
Switches one port up
Switches one port down
Switches to the previous port
Switches the Beep confirmation tone ON / OFF
Switches the universal Hotkey to **
Switches to Autoscan
Switches to Autoscan with port time 10s (1) to 100s (0)
Stops Autoscan
*
stands for the universal hotkey (factory default is SCROLL LOCK, configurable to new
hotkey ** NUM, CAPS, F12, or ESC key)
Fn1-Fn4 stands for the function keys F1, F2, F3, and F4
(#) To change the universal hotkey from the front push buttons please press the highest port
button until you hear two short confirmation beeps. Then press the chosen new hotkey
SCROLL, NUM, CAPS, F12, or ESC on your keyboard. The KVM switch will confirm this by
a short beep and the hotkey is permanently changed.
(Yes) When binding between KVM and USB Hub and/or Audio ports is enabled, pressing the front
push button will switch all: KVM & USB hub & Audio. If binding is disabled for Audio or the
USB hub this will not be included for port switching.
RESET to factory default: Press and hold the highest port button until the KVM Switch beeps two
times (provided the beep is not switched off).
[To print the above table this manual can be downloaded from the LINDY website.]
KVM Switch Pro USB Audio
Hotkey Input
* + * + Z (or Y)
* + * + X
* + * + Q
* + * + W
* + * + 1-4
* + * + Fn1-Fn4
* + * + Fn5-Fn8
* + * +
* + * +
* + * +
* + * + B
* + * + H + **
* + * + S
* + * + S + 0-9
Any key
- 6 -
English
Front
Yes
(Yes)
(Yes)
Yes (#)
Yes
Publicité
Table des Matières
