kikkaride WILDER Mode D'emploi page 4

WARNING!
• Carefully read the instructions for use of the scooter before use.
• The scooter must only be assembled by an adult.
• The scooter should be tested by an adult.
• When using the scooter we recommend the use of protective equipment - headgear, knee and elbow protectors,
appropriate shoes.
• Before using the scooter, you should instruct the child how to drive it. Using the scooter requires special skills and should be
used with caution to avoid falls and accidents.
• Use the scooter only during the day on equally safe rails and at a safe distance from streets and roadways on which vehicles
are moving.
• This scooter is not designed for aggressive driving, tricks and jumping!
• It is not allowed to climb and descend from slopes.
• The scooter brake is not intended to stop when descending from slopes.
• It is not allowed to drive on this model at speeds above 15 km / h.
• The use of a scooter by children is only allowed under the supervision of an adult.
• Check the tightness of all screws and joints before usage.
• Do not place objects or luggage on the handlebar to avoid the risk of damage to the steering wheel
equilibrium.
• Use away from rivers, pools, stairs or obstacles.
• Do not change or modify the scooter design. If necessary, contact your provider or a manifacturer for replacements and
instructions.
• Do not use spare parts and other components not supplied by the manufacturer. The manufacturer assumes no liability for
safety if spare parts are other than those originally approved for the type or recommended by him.
• Regular maintenance increases the safety of the scooter.
• Always check that the steering system is properly adjusted and that all fasteners are secure and not breakable.
• The scooter is intended to be used by only one child with weighting up to 50 kg. It is not recommended for children under
3 years old.
• This product complies with European standard EN 71. The materials used gor making of this product are suitable and safe
for children' s health.
ASSEMBLY THE SCOOTER
UNFOLDING THE SCOOTER: Unfold the scooter while holding the button. Follow figures from 1 to 6.
SCOOTER MOVEMENT AND BRAKE USE: When you tilt the handlebar to the right, the wheels turn to the right and the scooter
makes a right turn. When you tilt the handlebar to the left, the wheels turn to the left and the scooter makes a left turn. In
the upright position, the scooter moves forward(Figure 7).
On the rear wheel of the scooter there is a BRAKE. To use the brake while driving, the child must step with the heel of one
foot on it and push it until the scooter stops. Use the break with only one foot (Figure 8).
Note: The brake is being heated when used. Do not touch hands after using the scooter!
ADJUSTING HEIGHT OF THE CORMEL: Unscrew the plastic bracket of the scroll wheel and adjust its height. After reaching the
appropriate height, screw the same bracket in the opposite direction (Figures 9 and 10).
BATTERY INSTALLATION: Remove the battery bay cover. Install the batteries with respect to their polarity. Insert the cap and
secure with a screw. Press the button and the LEDs on the bottom of the scooter will switch on (Figure 10).
ENGLISH