Technical Data - Husqvarna 129C Manuel D'utilisation

3. Replace the air filter if it is too dirty to fully clean it.
Always replace a damaged air filter.
4. If your product has a foam air filter, apply air filter oil.
Only apply air filter oil to a foam filter. Do not apply
oil to a felt filter.
To apply air filter oil to the air filter
CAUTION:
oil on foam air filters. Do not use other types
of oil.
WARNING:
body.
1. Remove the air filter cover and remove the air filter.
(Fig. 58)
Engine Specifications
Cylinder displacement
Electrode gap
Fuel tank volume
Idling speed
Maximum power speed
Power output
Spark plug
Maximum output shaft rotation
Noise and Vibration Data
Equivalent vibration level (ahv, eq) left handle - see
note 1
Equivalent vibration level (ahv, eq) right handle - see
note 1
Sound power level, guaranteed (L
Sound power level, measured - see note 2
Sound pressure level at operator's ear - see note 3
Product Dimensions
Weight (excluding cutting equipment)
12
Always use special air filter
Do not get oil on your

TECHNICAL DATA

) - see note 2
WA
2. Put the air filter in a plastic bag.
3. Put the air filter oil in the plastic bag. (Fig. 59)
4. Push the plastic bag to make sure the oil supplies
equally across the air filter.
5. Push on the air filter, while in the bag, to remove the
air filter oil that is not necessary. Remove the air
filter from the bag.
6. Install the air filter.
To add grease to the bevel gear
Make sure that the bevel gear is filled 3/4 full with bevel
gear grease.
(Fig. 60)
unit 129C
(A05328CCHV)
3
cm 27,6
mm 0,5
3
cm 343
-1
min 2800 - 3200
-1
min 8000
kW 0,85
Husqvarna
HQT-4
-1
min 8500
3,64
2
m/s
3,59
2
m/s
dB(A) 114
dB(A) 106
dB(A) 93
kg 4,61
129L 129LK
(A05328CSHV) (A05328CSHV)
27,6 27,6
0,5 0,5
343 343
2800 - 3200 2800 - 3200
8000 8000
0,85 0,85
Husqvarna Husqvarna
HQT-4 HQT-4
7200 7200
9,9 9,9
8,9 8,9
114 114
105 106
95 95
5,21 5,98
155 - 008 - 24.08.2021