Publicité
Les langues disponibles
Les langues disponibles
GENERAL
The product described herein is a ventilation kit for small up to medium-sized domestic premises. The fan and the ventilation
grille are made of plastic. The ventilation kit is designed for through-the-wall mounting, Fig. 1.
DELIVERY SET
Box includes:
1. Fan - 1
2. External grille - 1
3. Plastic air duct - 1
4. Screws and expansion anchors - 6
5. User's manual
UNDERSTANDING MODEL NUMBER
The three digit number in all model names indicates the following:
100 (100 mm) means it is used with 4" air duct;
125 (125 mm) means it is used with 5" air duct;
150 (150 mm) means it is used with 6" air duct.
MOUNTING
The ventilation kit is designed for through-the-wall mounting.
Mounting steps:
1. Select an installation place for the ventilation kit and drill a round core hole. Its diameter must match the air duct
diameter, Fig. 2.
2. Insert the air duct in the hole and fix it with a mounting foam, Fig. 3.
3. Install the fan, Fig. 4-9.
4. Install the external grille, Fig. 10.
Input: 120 VAC 60 Hz. The fan is equipped with a power cable with a plug for connection to a standard wall socket or with a
terminal box for direct connection to power supply. Connection to power supply is shown in Fig. 11-14.
OPERATION CONDITIONS
The ventilation kit is rated for continuous operation always connected to power supply.
Protection rating from access to dangerous parts and water penetration is IPX4.
The fans can be operated at ambient temperatures between +32 F (0 °C) up to 113 F (+45 °C).
MAINTENANCE
The fan surfaces need to be cleaned of dirt and dust regularly by using a soft, wet cloth and mild detergent.
Do not allow liquids to come in contact with the electric motor!
Wipe the surfaces dry after cleaning.
The product design is constantly being improved, that is why some models can differ slightly from those described in this
manual models.
3
Publicité
