Krampouz CEBIV3 Notice D'utilisation page 12

▪ The appliance must be connected to the mains by means
of a residual (differential) current device with a rated
residual operating current of 30mA maximum.
▪ It is recommended to use this appliance in an environment
that does not exceed a temperature of 40°C.
▪ It is recommended to examine the power supply cable
regularly in order to detect any signs of deterioration.
▪ Do not connect nor use any appliance with a damaged
plug or cable. If the power supply cord is damaged, it must
be replaced by the manufacturer, its after-sales service or
a similar qualified person to avoid any danger.
▪ In case of failure, the examination and repair should be
performed by a qualified technician.
▪ All maintenance must be performed by a qualified
technician.
▪ If a fixed machine has a cordon without plug, a legal way
to disconnect it shall be planned in the installation.
▪ The appliance is not designed to be switched on by an
external timer or separate remote control system.
▪ If you need to use an extension lead, take care to unwind
the whole length in order to avoid the cable overheating.
▪ Always connect or disconnect the cable to the power
socket with the setting knob set at a minimum and 'off'
position.
▪ In order to avoid electric shocks, do not immerse the
cable, socket or body of the appliance in water or any
other liquid. Do not handle with wet hands either.
▪ Do not let the cord hang over the edge of a table or
counter.
- 12 -