Bluetooth Mode - Raikko DANCE BT Mode D'emploi

English
Volume
Adjust the volume with the volume control on your audio device. You
can also adjust the volume on the speaker. Increase the volume by
moving the slide switch 1 to the right. Lower the volume by moving
it to the left. You must hold the slide switch in order to adjust the
volume in BT mode. Press (do not hold) to switch to the next/
previous track.
Attention! Setting the speaker to a signal level that is too high can
lead to overmodulation. Select a volume level that does
not cause distortion in the sound quality.
A high signal level can cause hearing damage. Do not
place the speaker directly next to your ear, the ear of
another person or of an animal.

Bluetooth Mode

You can control your audio device with the Dance BT, provided it
supports the Bluetooth standards A2DP1.2, AVRCP1.0, Headset
profiles 1.1/Hands-Free Profiles 1.5.
Press the spring button 1 once to play or pause a track.
Move the button 1 to the right once to switch to the next track.
Move the button 1 to the left once to restart the current track or
several times to switch to a previous track.
You can accept incoming calls when using a Bluetooth-ready mobile
telephone by moving the control 1 to the right and (indicated by a
symbol of a telephone that has been picked up). End the call by
pressing the button (marked by a telephone symbol).
14
DANCE BT Vacuum Speaker English
Charing the Integrated Power Pack Battery
Connect the speaker to the USB port of a PC/Mac or a USB adapter
to charge the battery. Use the connection cable that was delivered
with the speaker. Connect one end to the Dance BT (micro USB)
and the other end to a USB port. The LED display will turn red while
the battery charges.
The LED display will turn blue once the battery is fully charged. The
charging process will take 2– 4 hours depending on the battery level
at the start of charging.
Combining Multiple Speakers
Multiple speakers can be connected in series for increased output
and better sound. Use the connection cable for one of
the speakers with the BuddyPlug on the Dance BT (3.5 mm).
If you wish to connect multiple Dance BT speakers, make sure the
other speakers are set to cable mode.
Specifications
Dimensions (closed):
Weight:
Speaker:
Frequency range:
Battery type:
Battery capacity:
Charging voltage:
Charging time:
Charging connection:
DANCE BT Vacuum Speaker
66 mm (ø) x 52 mm(H)
100 g
45 mm Membrane –
3.5 W (4 Ω)
150 Hz–16 kHz
Lithium-polymer
550 mAh
5 V ± 0,5 V
~2.5 h (5 V)
Universal Serial Bus (USB)
15