English; Delivery Contents; Cable Connection - Raikko DANCE BT Mode D'emploi

English

Introduction
Dear Customer,
Thank you for choosing
the instructions and safety and warning information in order to
ensure the correct use of your new product.

Delivery Contents

• 1 Dance BT speaker
• 1 Charging cable
• 1 Cloth bag
• 1 User's Manual
Overview
1.1. Play/Pause
1.2. Volume – /
Previous track
1.3. Volume + /
Next track
3. Microphone
4. Charging socket
5. BuddyPlug
12
DANCE BT Vacuum Speaker
. We ask you to carefully read
2.3. Cable
connection
2.2. Bluetooth- 2.1. OFF
connection
6. Charging cable
English
Opening the Dance BT
Turn the speaker cover counter-clockwise until the locking
mechanism fully releases. Hold the speaker with both hands to
prevent the sound box from falling out.
Connect the Dance BT to the headphone jack (3.5 mm) of an
audio source with the connection cable in the base or establish a
Bluetooth connection.
Attention! Don't take apart the speaker while it is open. The built-in
spring maintains an adequate volume for the sound box.
Power On
Select the desired connection type with the slide switch 2.
When set to BT, the LED display will blink. In cable mode the display
will remain on.
If you select "Bluetooth" for the connection type, the speaker will
start in pairing mode. It will search for a device with an activated BT
interface. The device can then be connected to the Dance BT. For
more information on Bluetooth connections, please read the user's
manual for your audio device.
If a Bluetooth-ready device that has already been paired with the
speaker is in range, a connection will automatically be made between
the speaker and the device.
The speaker cannot be connected to multiple devices at the same
time. The speaker can only play music from one device at a time.
DANCE BT Vacuum Speaker
13