Safety Information - Weller MG100S Traduction De La Notice Originale

device and starting work with the device.
Keep these instructions in a place that is accessible to all
users.

Safety information

above and persons with reduced
supervision or instruction concer-
ning use of the appliance in a safe
the appliance.
hout supervision.
WARNING
cal conductors may be bare or the PE conductor
may not be functional.
specialist.
organisation.
Find Quality Products Online at:
Read these instructions and the
accompanying safety information
carefully before starting up the
Electrical shock
If the device is faulty, active electri-
GlobalTestSupply
www.
Danger of asphyxiation, Danger of
WARNING
poisoning
Improper installation can result in above-normal
workplace concentrations
Measure the workplace concentration upon completion
of installation work
Inappropriate maintenance cycles for gas media
may result in above-normal workplace concentra-
tions
Above-normal contamination levels in the ambient
air during cleaning work on the pipe system/extrac-
tion area
-
to capture harmful substances. The harmful subs-
tances will be released back into the environment
intervals.
-
High concentrations of harmful gases can lead to
overheating of the activated carbon and possibly
Run the unit on clean air for several minutes before
switching off.
-
medium used.
and indoors.
from the soldering gun.
Danger of asphyxiation, Danger of
WARNING
poisoning
Never use the device without the fan cover
.com
GB
ENGLISH
15
sales@GlobalTestSupply.com