Cegla RC-cornet plus nasal Notice D'utilisation page 12

VIsual GuIDe assembly
I
a.
c. d.
f.
coMBIneD tHeRaPY WItH neBulIZeR
Nebulizer
note: Please follow the instructions for use for your nebulizer
as well as your inhalation device and your corresponding
medication.
nebulizer ring
Article no. 2650
22 | EN
b.
e.
g.
Nozzle
Elbow connector
RC-Cornet
®
PlUS NASAl
InstRuctIons assembly
I
a. Connect the one way valve with the adapter.
b. Connect the nozzle to the nosepiece.
Center and connect the part to the adapter. For using the
device please follow the instructions (see pages 18 and 19).
c. Remove the cleaning aid from the tube.
d. Connect the tube with the adapter and make sure that
the centering dot clicks into the cut-out of the adapter.
e. Guide the piece into the body. Make sure that the arrow on
the adapter and on the body are aligned.
f. Check the tube position. It should not be kinked.
g. Reattach the body lid.
coMBIneD tHeRaPY WItH neBulIZeR
combining Rc-cornet Plus nasal therapy with a standard
®
Iso nebulizer improves delivery of your nebulized medication
and reduces the total treatment duration. Furthermore the effec-
tiveness of both therapies is improved.
Insert the elbow connector between the nosepiece and nozzle.
Connect RC-Cornet PlUS NASAl to your nebulizer. Please
®
always use the middle position on RC-Cornet
for the combined therapy with nebulizers. This setting opens
your airways and stabilizes them. Please inhale and exhale
only through the device. The treatment duration corresponds
to the inhalation time.
note: A nebulizer ring is available for all non ISO nebulizers.
The nebulizer and the nebulizer ring are not included. Both
articles can be purchased separately. Compatible nebulizers
are listed at www.cegla.de
PlUS NASAl
®
EN | 23