Fm Radio Mode - Krüger & Matz KM0528 Mode D'emploi

Owner's manual

FM RADIO MODE

1. Prior to use, insert the audio cable to the 3,5 mm AUX input and use it as antenna
for optimum reception.
2. Make sure the speaker is turned on.
3. Press Mode button to switch to FM mode (blue LED flashes slowly).
4. Press Play/Pause button to auto search and store available FM channels (blue
LED is flashing).
5. Press Previous/Next button to go to the previous/next FM channel.
CHARGING
1. Connect one end of the microUSB cable to the charging port of the speaker then
connect the other end of the charging cable into the USB port of of the computer
or AC/DC power adapter.
2. When the battery is charging, red LED is on. When battery is fully charged, red
LED goes off.
Notes:
• Please be sure the battery has been charged fully before first use.
SPECIFICATION
• 3 speakers:
1. Output power: 2x 2 W; Impedance: 2,4 Ω; Diameter: 2" (mid-range)
2. Output power: 7 W; Impedance: 4 Ω; Diameter: 4" (subwoofer)
• Frequency response: 100 Hz ~ 20 kHz
• THD: ~ 20%
• S/N ratio: ~ 60 dB
• Ports: microSD card slot, microUSB port (charging), AUX input (3,5 mm)
• Bluetooth: 2.1
• Operational range: up to 10 m
• Playback time: up to 2 h (full volume)
• FM Radio
• Battery capacity: 1800 mAh
• Charging voltage: 5 V / 1 A
9