Panasonic TY-FB11DHD Mode D'emploi page 3

Connection
Slot Nos. of the display unit that are compatible with terminal board attachment.
Slot1, Slot2 (Slot3 is not compatible)
* This terminal board supports the PF series only.
(PF11 series and subsequent series.)
● When making HD-SDI connections
Back view of the Display
IN
Hardware with HD-SDI input capability
Ex.: Digital VTRs for commercial or
broadcast use
Monitors for commercial use
(CRT, LCD, or PDP)
* This is a Dual Link HD-SDI board and can also receive HD-SDI signals and distinguish signals automatically.
However, the terminal that can accept input is fixed (Input 1).
Note:
• The hardware and cables described above are sold separately.
SLOT1 SLOT2
OUT
Digital video
decks for
commercial use
HD-SDI INPUT
HD-SDI OUTPUT
SLOT3
• Recommended cable
75 Ω coaxial cable 5C-FB
• Maximum extended length: 100 m
* When using a cable with a length of less
than 100 m and an attenuation of 20 dB at
750 MHz
Hardware with HD-SDI output capability
Ex.: Digital VTRs for commercial or
broadcast use
Monitors for commercial use
(CRT, LCD, or PDP)
PC IN
9