Connecting The Ac Power Cord - Sony TA-E9000ES Mode D'emploi

MONITOR CTRL S IN hookup (for USA and
Canadian models only)
If have a Sony TV monitor equipped with a CTRL
S OUT jack
Use a CONTROL S cord (not supplied) to connect the
CTRL S OUT jack on the monitor to the MONITOR CTRL
S IN jack on the control amplifier. This allows you to turn
on your Sony TV monitor automatically when you turn
on the control amplifier using the supplied remote
control.
Refer to the operating instructions supplied with you
Sony TV monitor for details.

Connecting the AC power cord

Before connecting the AC power cord of this control
amplifier to a wall outlet:
• Turn the MASTER VOLUME control to the leftmost
position (0).
Connect the AC power cord(s) of your audio/video
components to wall outlet(s).
If you connect other audio/video components to the AC
OUTLET(s) on the control amplifier, the control amplifier
will supply power to the connected component(s),
allowing you to turn the whole system on or off when you
turn the control amplifier on/off.
Caution
Make sure that the total power consumption of the component(s)
connected to the control amplifier's AC OUTLET(s) does not
exceed the wattage stated on the rear panel. Do not connect
high-wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.
11 GB