Important Information; Warning And Safety Instructions; Warranty - Exclusion Of Liability; Certificates - Helios ultra Silence SlimVent SVV 80 Notice De Montage Et D'utilisation

Installation and Operating Instructions
UK
CHAPTER 2

GENERAL INFORMATION

NOTE
WARNING
Slim centrifugal fan box – SVV 80
2.0

Important information

To ensure safety and correct operation please read and observe the following instructions carefully before proceeding.
The electrical connection must be fully isolated from the supply up to the final assembly ! After the final assembly the
document must be handed out to the operator (tenant/owner).
2.1

Warning and safety instructions

Accompanying symbol is a safety-relevant prominent warning label. All safety regulations and/or symbols
must be absolutely adhered to, so that any danger situation is avoided.
2.2 Warranty – Exclusion of liability
If the preceding instructions are not observed all warranty claims and accommodation treatment are excluded. This al-
so applies to any liability claims extended to the manufacturer.
The use of accessories not offered or recommended by Helios is not permitted. Potential damages are not liable for
warranty.
2.3

Certificates

If the product is installed correctly and used to its intended purpose, it conforms to all applicable European Standards
at its date of manufacture. Types with 'national technical approvals', DIBt. Certificate number: Z-51.1-193
2.4

Receipt

Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify carrier immediately.
In case of delayed notification, any possible claim may be void.
2.5

Storage

When storing for a prolonged time the following steps are to be taken to avoid damaging influences: sealing of bare
parts with anti-corrosion agent, protection of motor by dry, air- dustproof packing (plastic bags with drying agent and
moisture indicators). The storage place must be water proof, vibration-free and free of temperature variations.
When storing for several years or non rotation of motor an inspection of the bearings with possible relubrication and an
electrical inspection to VDE 0701 and VDE 0530 are absolutely necessary before starting operation. When tranship-
ping (especially over longer distances) check if the packing is adequate for method and manner of transportation.
Damages due to improper transportation, storage or putting into operation are not liable for warranty.
2.6

Application/Operation

The SlimVent ventilators are designed for versatile use in the new building and with the renovation. In the robust casing
made from impact resistant polymer the device for the industrial-, commercial- and living sector is suitable for the ven-
tilation of humid rooms, toilets etc.. The high performance energy saving motor and ultraSilence® technology for whis-
per-quiet operation make a universal use possible. In order to ventilate several rooms one or two extraction spigots (ac-
cessories, see page 2) can be connected to the casing by removing the temporary cover plate. The SlimVent fans ha-
ve three performance levels 110, 65 and 35 m³/h as standard.
With insertion directly in-line e.g. false ceilings, the device with only 98 mm of installation depth fits everywhere-no mat-
ter, how narrowly it is.
Long-lasting greased ball bearings, which are laid out for 40.000 operating hours, guarantee an easy, noiseless run and
permit the installation in every position. The fan may only be used according to its intended purpose.
2.8 General Information
Intake air duct: Every room which must be ventilated must have an intake air opening (which cannot be closed) of
2
150 cm free cross section.
2.9 Saftey
All servicing and installations may only be carried out by a certified electrician.
- The fans may be operated only with the rated voltage indicated on the type plate.
- Technical data on type plate are to be adhered to without fail.
- The degree of protection given on the type plate is only valid with designed installation in accordance with these
installation and operating instructions and with closed facia.
10