Connecting The Speaker Cables - Denon SC-N7 Manuel De L'utilisateur

Connections
When connecting the speakers to an amplifier, be sure to read the
amplifier's owner's manual carefully and connect properly.
• Connect the input terminals on the rear panel of the speaker with
the speaker output terminals on the amplifier, using the included
speaker cables.
• Connect the speaker for the left channel to the "L" terminal on the
amplifier, the speaker for the right channel to the "R" terminal on
the amplifier, making sure to check the polarities ("+" and "–").
Amplifiers have various speaker output terminals.
Check the owner's manual of the amplifier you are using for details.
NOTE
• Be sure to turn the amplifier's power off before connecting the
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure
to connect the polarities properly.

Connecting the speaker cables

"–" side "+" side
terminal: Black terminal: Red
Connect to amplifier's
"–" side: Plain core
Lever
1
Peel off the sheath from the tip of the
speaker cable, then firmly twist the
wires by hand so that they do not stick
out and cause short-circuits.
2
Press and lower the lever, and insert
the cable's core wire into the hole.
3
Release the lever.
Gently pull on the speaker cable to
check that it is firmly connected.
Once connections are completed, pull gently on the speaker cables
to check that they are securely connected.
NOTE
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
Specifications
Type:
Frequency range:
Input impedance:
Max. input:
Sensitivity:
Connect to amplifier's
Crossover frequency:
"+"side: Striped core
Speakers:
Maximum external
dimensions:
Weight:
* For improvement purpose, specifications and design are subject to
change without notice.
ENGLISH
2-way · 2-speakers
Reflex box
50 Hz – 20 kHz
6 Ω/ohms
60 W (IEC), 120 W (PEAK)
82 dB (1 W · 1 m)
7 kHz
12 cm (4-3/4") cone bass-mid x 1
2.5 cm (1") balanced dome high
range x 1
145 (W) x 233 (H) x 236 (D) mm
(5-45/64" x 9-11/64" x 9-19/64")
2.3 kg (5 lbs 1.1 oz)
2