Elbro ET 2114 Mode D'emploi page 18

ET 2114
Anhang C / annexe C:
1. General Specifications
Display
Sensor
Type
Functions
Resolution
Circuit
Emissivity
Adjustment
Laser Guide
Probe Input
Socket
Sampling Time
Hold Function
Memory Recall
Offset
Adjustment
Over Indication
Data Output
Power Supply
Power
Consumption
Operating Temperature
Operating Humidity
Size
Weight
Standard Accessory
Optional
& accessories
Temp. Probe
18
51 mm x 32 mm supper large LCD display,
15 mm ( 0.6" ) digit size.
1. Infrared thermometer
( Non contact temperature measurement )
2. Thermocouple probe
@ Thermocouple type K
@ Thermocouple type J
@ Thermocouple type T
@ Thermocouple type E
@ Thermocouple type R
° C, ° F, Data hold, Memory ( Max., Min. ),Relative meas-
urement, Emissivity adjustment (IR thermometer).
0.1 degree or 1 degree.
Exclusive microcomputer circuit, the
software build in linearity correction function
instead of the traditional hardware circuit.
Range : 0.20 to 1.00.
Adjustment by pushing button on front panel.
Red laser light, less than 1 mW,
Meet EN60825
Thermocouple couple probe :
Standard 2 pin thermocouple socket.
Approx. 1 second.
To freeze the display reading value.
Memorize the Maximum, Minimum
reading.
Available for IR thermometer, &
Thermocouple thermometer Adjustment by
pushing button on front panel.
Show " - - - - ".
RS232 PC serial interface.
Alkaline or heavy duty type,
DC 9V battery, 006P, MN1604 ( PP3 )
or equivalent.
Approx. DC 11 mA ( w/o laser light on ).
Approx. DC 16 mA ( with laser light on ).
* Above consumption value is caculated under
the function of IR thermometer & without LCD
back light.
0 to 50 °C (32 to 122 ° F).
Less than 80% RH.
HWD 200 x 68 x 30 mm
220 g
Operational manual..... 1 PC.
Thermocouple couple ( Type K ) probe :
Model : TP-01, TP-02A, TP-03, TP-04.
RS232 cable
Model : UPCB-02
Application software, windows version.
Model : SW-U801-WIN