Hydraulic Oil Reservoir Screw - KS Tools 160.0731 Notice D'utilisation

4. Using the hydro-pneumatic jack
The jack is ready for use after correctly connecting the air valve. Test the jack empty before lifting a load.
Disconnect the compressed air supply valve and press the lever (#10-8) to bring the piston back down.
The piston will come back down automatically when the retaining lever (#10-10) is locked.
To stop the piston, press the lever (#10-8) to unlock the retaining lever (#10-10) then release the lever (#10-8).
To bring the piston back down: Open the valve, turn the operating button (#5-2) anticlockwise.
When the piston is down, screw up the operating button clockwise (Diagram 3).
To change the position of the jack handle (see Diagram 3), pull the locking lever (#5-6) to release the handle and set it
in one of the three available positions. Ensure that the handle is well engaged in the hole and lock the lever down.
The jack handle is not intended for moving the jack. Never apply the weight of your body on the handle when the jack
is being used.
The jack comes with 4 extensions. The adapters are used individually by placing them in the hole in the saddle.
Before lifting the vehicle, inspect the part that will come into contact with the adapter in order to select an adapter of a
suitable size and shape.
Before using the jack, make sure that the adapter and the area of contact with the vehicle are clean and degreased,
and correctly positioned.
5. Maintenance
N.B. The jack safety valve has been factory calibrated. Never try to remove it.
Lubricate the jack once or twice a month as shown in diagram 4, using good quality pneumatic oil
(ref. KS TOOL 515.3661). (Diagram 4)
The hydraulic oil in the jack must be replaced once or even twice a year, depending on how much the jack is used.
Only use good quality hydraulic oil. Diagram 5 shows the position of the hydraulic oil reservoir screw (Diagram 5).
Air valve
Locking lever (#5-6)
Open
Operating button (#5-2)
Pneumatic oil
Add the oil while
pressing on the lever
Diagram 4
Release the lever lock
close Diagram 3
Hydraulic oil
reservoir screw
Diagram 5