KS Tools 160.0731 Notice D'utilisation page 10

1. Clear the working area. A cluttered working area is a source of accidents.
2. Examine the working area. Never use any machine on a wet floor or a floor exposed to rain.
Make sure the working area is well lit. Never use any electrical machine near flammable materials.
3. Keep children away. Children must not be allowed to enter the working area or to use tools,
machines or extensions.
4. Storage. Unused tools must be stored in a dry place out of reach of children.
5. Do not overload the jack. Use the jack to lift loads for which it is intended.
Do not add any device to increase the lifting capacity.
6. Use the right tool. Use a tool suitable for the job you want to do.
Do not use a tool to do a job for which it was not intended.
7. Wear protective clothing and goggles. Remove all items of jewellery. These can cause an accident.
8. Do not lean. Do not lean over moving parts.
9. Keep tools clean and in good condition. Keep tools clean and in good condition. Check their condition regularly.
Any defective tool must immediately be withdrawn. Keep tools clean and dry.
10. Unplug the power supply. Unplug the compressed air when the jack is not in use.
11. Unplug pneumatic tools. Before using the jack, make sure that pneumatic tools are unplugged from the
compressed air supply.
12. Stay alert. Concentrate on what you are doing. Do not use tools when you are tired.
13. Check for defective parts. Before use, check that all the parts are in good condition with no defects.
Check the connections, moving parts and remove them if there is the slightest defect.
Do not use the tool if the on/off switch is defective.
14. Replacing defective parts. Use exclusively manufacturer's original spares.
The use of any other part will annul the guarantee.
15. Do not use the jack while under the influence of alcohol or drugs.
N.B.: The safety instructions in the manual cannot cover all situations or fields of use of the product.
Common sense and caution are factors that cannot be included in safety instructions.
It is up to the user to exercise them.
!
WARNING
Do not overload the jack. Its maximum lifting capacity is 35 tonnes.
The jack must be used by a trained and qualified person.
This jack is designed only for lifting. Always support the load before working under the vehicle, using axle stands.
Use the jack on a clean, stable surface that can withstand the load.
Do not move the load with the jack.
Apply all safety measures before lifting the load.
2.1 Unpacking
While unpacking, please ensure that the jack is complete and conforms to the list on pages 8 and 9.
Please contact KS TOOLS if any parts are missing.