Operation - VOLTCRAFT BT-2 Mode D'emploi

8. OPERATION

If overloaded, the product might get damaged. The
warranty will get void in such a case.
The device is not suitable for use in explosive
environments.
Avoid impact and strong vibrations as well as operation in
direct sunlight.
You may connect the terminal connectors in any sequence.
But make sure that the terminal connectors only get in
contact with the proper terminals (positive/negative) of the
car battery and not with any other objects.
When using car batteries that are not maintenance-
free, make sure the caps are closed while connecting/
disconnecting the battery tester.
Lead acid batteries generate explosive gases during
normal use that could ignite by sparks. Avoid sparks/short
circuits at any costs. Never short-circuit any contacts.
Caution: When connecting the terminal connectors to the
battery terminals, sparks can be generated.
It is essential that you ensure sufficient ventilation. Carbon
monoxide leaking while the engine is running is highly
toxic. Never inhale exhaust fumes.
Always wear protective goggles when working with lead
acid batteries, in order to protect your eyes from contact
with lead acid.
23