Providing Customers With Units (Captioning Mode); Providing Customers With Units (Audio Mode) - Sony STW-C140GI Mode D'emploi

Providing
Customers with
Units (Captioning
Mode)
Before providing customers with units,
check the screen position alignment and
select the channel and language (see pages
17 to 18).
1
Connect the cable of the captioning
glasses to the connector of the receiver
box.
Note
The triangular marks of the plug and
connector should be aligned.
2
Have the customer put on the glasses.
Notes
• The captioning glasses can be worn over the
customer's own eyeglasses.
• Hold the captioning glasses by the temple
frames.
• Any BTE (behind-the-ear) hearing aid
should be removed before wearing the
captioning glasses.
Providing
Customers with
Units (Audio Mode)
Before providing customers with units,
select the channel and audio (see pages 17 to
18).
1
Connect the headphones to the
headphone jack of the receiver box.
2
Have the customer put on the
headphones.
Notes
• Any hearing aid should be removed before
wearing the headphones.
• Assistive audio is still audible at the
minimum volume.
19
GB