Power Switch; Stand By Button - JB Systems DMX400 Mode D'emploi

1. Power Switch

2. Channel Flash Button
Press to activate channel full on.
3. Channel Dimmer Control
This control adjusts the dimming level of the corresponding
channel.
4. Mode Select Button
Press the button. You can select the desired mode through line
input or built-in microphone: Hold dimmer/Hold sound/Prog
sound/Prog speed/Auto speed/ Auto sound/Memory and Music
Control.
5. Program Select Button
With this button you can select one of the 42 preset
programs with functions Prog sound/Prog speed/Auto speed/
Auto sound. In memory mode, you can activate the sub mode
to select the desired operating mode from: Program/Manual/
Auto sound/Auto speed.
6. Fade Time Control
The slider adjusts the delay time.
7. Stand By LED
Will light in stand by mode.

8. Stand By Button

This button will reduce the output level of all channels to
'0' (blackout).
9. Master Dimmer Control
Adjusts the output level of all channels.
10. Audio Control
With this slider you can adjust the sensitivity of the audio
signal.
11. Full On Button
Acitvates the maximum output level of all channels.
12. Speed Control
The fader adjusts the chasing speed
3 DMX 400