Philips AC3256/10 Mode D'emploi page 15

1
Pull the bottom part of the front
panel to remove it from the
appliance.
2
Press the two clips down and pull
the pre-filter towards you.
3
Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust.
4
Air dry the pre-filter.
Note
•
Make sure that the pre-filter is
completely dry. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
5
Put the pre-filter back into the
appliance.
Note
•
Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2)
EN
15