Display Setup; Maintenance And Cleaning; Declaration Of Conformity - Indexa DF-100 Mode D'emploi

Sort by recording mode
!
Click on any file to select it.
The playback can be controlled by clicking the following symbols:
Playback / Pause /
Forwards / Stop
The files can be deleted using the following symbols:
Delete selected file
Delete all files
Note: The storage location on the hard disc can be seen by clicking
"Storage".

15.11 Display setup

!
Click .
!
Click "Display".
!
If you wish to have a time and date stamp on the recorded images then
click on "Time Stamp".
!
If you wish to write the name of the camera on the recorded images then
click on "Camera Name" (in this case the camera name must also be set).
!
Enter the camera name if required.
!
Click to activate the selected settings.
15.12 Advanced function: camera pairing
If you wish to pair the transmitter to another channel or to pair an additional
transmitter (max. 3 additional transmitters) with the monitor this can be done
using the buttons on the remote control (see section 12.4) or alternatively on
the PC:
!
Click .
!
Click "Device".
!
Check that the camera is powered (POWER LED [9] lights red) and that it is
32 - GB
Backwards /
within the reception range of the monitor.
!
Check that "Digital Wireless Camera" is selected.
!
Click on the chosen camera channel "CAM1" to "CAM4".
!
Within 60 seconds press the pairing button [11] on the transmitter and
hold it pressed for 5 seconds.
!
Click to save the selected settings.
A successfull connection is indicated by the display of the camera picture on the
screen and the lighting of the red connection LEDs [10 and 21].
16. Wireless range
The wireless range is dependent on many factors. In an ideal location and by
free line of sight (between both antennas) a range of up to 200 m is possible,
within buildings this is reduced to maybe 20 m.
and
The range cannot be guaranteed as it is dependent on the local conditions.
A reduction of the range will be caused by:
!
Walls and Floors, in particular those of metal or with metal reinforcement
!
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
!
Electrical cables and electrical products (eg. Those containing electrical
motors, microwave ovens)
!
Devices using the same or similar frequency (eg. WLAN-systems)

17. Maintenance and cleaning

!
The products are maintenance-free: do not open the housings
!
Check the safety and function regularly
!
If the range of the remote control becomes weak, replace the battery
(CR2025)
!
Remove the mains adapters from the mains sockets before cleaning
!
Use a soft, slightly moist cloth or brush to clean the surfaces
18. Optional Accessoires
!
Additional transmitter DF-210TX with accessoires. Art. Nr. 27 251
!
Additional wireless camera with accessories. Art. Nr. 27 2331
19. Disposal
Do not dispose of packaging material, used batteries or products as
household waste. Please use your recycling system. Details are
available from your local authority.

20. Declaration of conformity

Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product complies with the basic requirements and the other relevant
regulations of Directive 1999/5/EC. Conformity has been demonstrated. The
complete declaration of conformity can be read at: www.indexa.de
This product can be used in the following countries:
D A L CH NL B IRL GB