Cleaning And Maintenance; Technical Specifications - VelLight LQ12N210DRGB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4. Features
This data LED strip has 50 segments. Each segment contains 3 RGB LEDs and is controllable via a
digital signal. Only 3 wire connections are needed to connect this LED strip (data signal and power
supply). The data speed is 400 or 800 kbps in high-speed mode, which allows you to program fluent and
fast-changing light effects.
suitable DMX controller: LEDC25 (not incl.)
usage: indoor
application: decoration, illumination, signalisation
fixation: 3M adhesive tape
flexible PCB (white)
contains 150 high-brightness LEDs
5. Connection
Refer to the illustrations on page 2 of this manual.
Connect the LQ12N210DRGB LED strip correctly to your controller. The controller (not incl.) used in this
example is the Vellight LEDC25.
a.
Connect the 12 V input of the LED strip to the DC+ output of the controller.
b.
Connect the data input of the LED strip to the data output of the controller.
c.
Connect the ground of the LED strip to the ground of the controller.

6. Cleaning and Maintenance

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.

7. Technical Specifications

IP rating
coating
colour
wavelength
luminous flux
LED type
IC type
viewing angle
connections
white wire
red wire
black wire
power consumption
dimensions
V. 02 – 22/10/2015
LQ12N210DRGB
IP20
no
red-green-blue
red
620-625 nm
red
90 lm/m
5050
WS2811S
120°
data signal
12 VDC
ground
maximum 36W
5 m x 10 mm
4
green
522,5-525 nm
green
170 lm/m
blue
470-472,5 nm
blue
45 lm/m
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières